Carving machine maintenance metho
Most of the tracks on the market today use imported raw materials, and their prices are relatively expensive. In order to improve work efficiency and reduce costs, we must pay more attention to the maintenance details of the track. For different engraving machines, different tracks must have different maintenance methods.
The maintenance method of the guide rail of the woodworking engraving machine is as follows: it is required to clean the surface of the main shaft of the main shaft after each operation, to clean all the chips and dirt on the rail, and secondly to check whether the surface of the guide rail is scratched or not. After cleaning, add lubricant to the rail to facilitate the next day's work.
Stone engraving machine track maintenance method: Because the stone engraving machine often uses water, the machine is relatively moist, and the track must be maintained every day. Care must be taken when maintaining the oil for the spindle polished rod; high-speed butter must be used for the screw part; if the working environment temperature is too low in winter, the screw, polished rod, square rail or circular guide should be used first. Rinse and clean, then add the oil, otherwise it will cause problems such as excessive resistance of the transmission part of the machine and misalignment of the machine.
No matter which type of engraving machine must be paid attention to before maintenance, first turn off all the power, check whether it is still energized, and wait until there is no safety hazard before proceeding to the next step. If you compare the engraving machine to a person, then these tracks are the feet that people can move freely. It is very important to see the track maintenance of the engraving machine.
