Woodworking engraving machine engraving 3D embossing method When clearing the milling bottom, the overlap percentage continuous engraving method should be defined, and the area where the above-mentioned milling is flat is regarded as the initial plane, and the three-dimensional processing is continued. In this way, the actual engraving depth may be greater than the designed depth, but the height of the marble engraving machine blade plus the shank cannot be exceeded. When processing, you can modify the picking distance, the picking distance, and the three-dimensional clearing processing parameters. When machining larger objects or using thicker tools, the picking distance can be increased accordingly. Normally, it is recommended to use the default value of 0.1 mm. The angle of the picking angle is too small, which may cause too many corners and affect the actual processing effect of the woodworking engraving machine. The engraving sequence with varying shades is automatically generated. This effect made by the woodworking engraving machine gives a strong three-dimensional feeling. Under normal circumstances, this kind of engraving is done by a sharp knife. Sometimes, due to the large area between the two lines of the pattern or the thicker strokes, the so-called island carving software can be processed to provide two kinds of island carving software. Processing method: island processing and continuous engraving. The so-called island processing, woodworking engraving machine 3D engraving 3D engraving is also called woodworking engraving machine for three-dimensional clearing. This function is based on the pattern I designed and the selected tool. It is to process some of the above-mentioned unprocessed areas by using a milling bottom.
