Woodworking engraving machine is a device used for wood processing. This is to make the wood more beautiful and have good value. Nowadays, this kind of equipment is also sold in the market. There are many kinds of equipments, and all kinds of equipments are available. When choosing, it can be viewed from the aspects of price, quality and brand. When using it, follow the correct method. It should be noted that the use of the equipment requires better maintenance. How to maintain this equipment? What is the maintenance method?
Any equipment that wears out for a long time will wear out, and if it is not maintained, it will be easy to damage the equipment. Whether the engraving machine needs maintenance, it is necessary to see if the wood swarf of the equipment ventilates pile up. If this is the case, maintenance work must be done. Preparation tools are required. This has a screwdriver, a cross screwdriver, a small brush, a universal needle oil, etc. The maintenance operations are as follows:
Unplug the power cord of the device and pay attention to safety. Use a cross screwdriver to remove the screw counterclockwise, then use a screwdriver to remove the carbon brush screw counterclockwise, use a needle-nosed pliers to remove the carbon brush, carefully remember the position of the carbon brush, and use a brush to clean the carbon brush dust. An air spray gun can be sprayed gently. There is no dust, and the universal needle oil drops a little into the gap on the ring. The shaft should be unscrewed so that the oil can enter. Wipe off the outside oil, and then remove the removed screws, etc., and then open the device to see if it is normal. When purchasing equipment, you can find woodworking engraving machine manufacturers to ask for more details.
