How is the 3D advertising engraving machine engraved?

Open Wentai engraving software -> find 3D" to calculate the engraving path -> three-dimensional engraving method, focus on the "below depth" and "engraving tool angle" selection.

How to choose the tool in the three-dimensional engraving machine?

Generally, the three-dimensional knife in the center knife is selected. The larger the pattern to be engraved, the larger the angle of the three-dimensional knife.

How to edit the three-dimensional engraving machine?

1, power on reset;

2. Unload and load the engraving file;

3. Simulate and cancel the simulation;

4. Determine the origin of processing;

5. Slow down, open and adjust the spindle speed, start machining;

6. Adjust the processing speed;

7. Processing is complete.

How to control the system operation of the three-dimensional engraving machine?

1. Return to the machine origin (the machine origin is returned in the operation in the task bar);

2. Define the origin of the engraving (the X-axis and the Y-axis are set to 0);

3, the knife (set Z axis 0 points);

4, open and load (recall the file to be carved);

5, simulation (simulation);

6. Adjust the feed rate (engraving speed) and adjust the spindle speed (engraving speed);

7. Start carving.