In recent years, China's construction, cement, metallurgy and other industries have developed rapidly, and the use of crusher equipment has gradually expanded. However, because the customer often ignores the maintenance of the bearing, the machine malfunctions and cannot operate normally. The following Asian Fluid Network Xiaobian introduced some tips for extending the life of the crusher bearing, hope to help everyone.
1. First check the number of parts before installing the crusher equipment, and check the damage caused by the machining surface and thread of each part during loading and unloading.
2. When installing the crusher, apply dry oil on the fixed contact surface and apply thin oil on the movable surface. In particular, after the bearing is installed, the outer ring must be inclined to apply the lubricant for the bearing.
3, daily use should pay attention to cleaning the bearing, first put the bearing into the oil, then use the brush to brush the dirt on the bearing surface, then properly heat the oil, and then detailed cleaning of the ball and holes inside the bearing .
4. After the crusher has been working for a period of time, it is necessary to carry out regular inspections. Remove the hardware and if the bearing wears less, it can be turned on the lathe to the correct geometry. At the same time, pay attention to the gap between the eccentric shaft and the bearing bush and the mandrel and the bearing bush. If it exceeds 1.5 times, it should be replaced or padded.
5. The lubricant application of the bearing is also very particular. When the grease is lubricated, it covers all the roller surfaces. After the coating, the position of the outer ring is restored. It is also necessary to cover the dust with a plastic film.
For more products, please visit: http://www.bearingkingdom.com
