The convex and concave mechanical stone engraving machine has fast processing speed and high precision, which is a good helper for your processing of stone. The stone engraving machine can not only carry out engraving, but also can cut, and the following convex and concave machinery share the precautions when engraving and cutting.
1. Stone carving: The carving on the stone is usually a yin carving, and the depth of the carving is generally required to be deep. This power is generally set higher, such as encountering a harder stone may make the color of the engraved graphics become darker. If you want to make the color lighter, you can increase the speed of engraving and try to sculpt several times. Some stone will produce some fumes attached to the surface of the wood when engraving. If the paint is already painted on the stone, it can be carefully wiped off with a damp cloth. If it is not painted, it may not be cleaned, causing the surface of the finished product to be stained.
2, stone cutting: stone carving machine cutting stone depth is generally not deep, the maximum cutting depth depends on the material and the power of the spindle motor of the engraving machine, if you want to cut a very thick stone, you can slow down the cutting speed, cut into layers, but It may cause the cutting of the stone engraving machine tool. For specific operations, try to level, slow, and repeat the method of cutting the knife.
Welcome friends to visit the convex and concave machinery, on-site test machine.
